Steampunk lighter kit

Make your own lighter with this kit. Requires a 12mm drill bit or 31/64. (12mm can be a touch tight). There are no bushings for this kit. You simply drill a hole and turn the body also note the body of the lighter isn’t a tube you would turn it and then slide it over the lighter body afterwards 

We turned our own bushings from some scrap wood the inside of the hole is roughly the size of the outside of a Sierra bushing and the final outside diameter your turning to  is roughly that of a psi coffee scoop bushing.  These are of course just rough guidelines to help get you on your way. 

requires a blank 2” long 

lighter fluid not included 

blank not included 

Price is per kit