Antique Bronze Magic wand project kit

Make your own magic wand with this lathe turning project kit. The completed wand measures a whopping 17-1/2” long! The body of our example photo was turned using one of our stabalized buckeye Burl turning blanks 

The accents on either end of the handle are metal and the wand tip section is a durable plastic. 

You’ll need a 3/8 drill bit and a turning blank of 7/8”x3.5” minimum and the required turning bushings  to complete this project (sold separately)

Instructions can be found under the “turning instructions” section of our website 

wand kit selection=one wand kit 

bushing selection=one set of bushing