Pipe turning kit
Pipe turning kit
  • Load image into Gallery viewer, Pipe turning kit
  • Load image into Gallery viewer, Pipe turning kit

Pipe turning kit

Regular price
$10.50
Sale price
$10.50
Regular price
Sold out
Unit price
per 

Tradition 90deg style pipe turning kits. 

shown here In one of our recycled skateboard blanks, price is per kit! 

these are a fairly easy and straightforward kit to turn simply pick your blank and cut it to about 2-1/8” long.

Drill a 25/64 hole and epoxy or CA glue it to the threaded shaft. You’ll want to keep it close to Centre leaving thread on each side for the mouth and bowl piece to thread onto after you’ve turned it.

The two knurled nuts within the kit get threaded onto each end, put on your lathe between centre’s and turn to your desired shape. (using the nuts as a reference to turn to without turning off the edges of the nuts) You can also leave the knurled nuts off while turning and use callipers to measure the final size.

apply finish of your choice and then assemble each end should have a knurled but and ether the moth or bowl piece. The kit also comes with a rubber o-ring you can put between the bowl and knurled nut for a tighter seal   

 

please note we don’t ship this kit to the US